Choosing the right welding electrode holder is not an easy task and if not researched properly, you may even end up getting a bad quality welding electrode holder.
To help you choose the right one, I’ve analyzed over 874 customer reviews and have made a list of 45 best possible options.
Best welding electrode holder in 2022 [Top Picks]
My top picks when it comes to welding electrode holder are: KSEIBI 331215 300 Amp Welding Electrode Holder American Design and the KSEIBI 331215 300 Amp Welding Electrode Holder American Design. However, the right one depends a lot on the use-case. So it’s not necessary that my top picks are best suited for your use-case. That’s why I’ve also included 43 other decent options.
KSEIBI
14.9 ounces
11.2 x 3.6 x 1.4 inches
Features
- Large 300-Amp provides durability, up to 5/32" inch electrode capacity.
- Lightweight and easy to operate with newly designed level for good hand clearance and better hold.
- Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode.
- This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection.
- The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
Manufacturer: KSEIBI
Part Number: 331215
Item Weight: 14.9 ounces
Package Dimensions: 11.2 x 3.6 x 1.4 inches
Item model number: 331215
Is Discontinued By Manufacturer: No
Size: 300 Amp
Color: Orange
Finish: Copper
Material: Copper
Pattern: American Type
Item Package Quantity: 1
Number Of Pieces: 1
Number of Handles: 1
Handle Material: Plastic
Included Components: Stick Electrode Holder 300 Amp Capacity
Batteries Included?: No
Batteries Required?: No
KSEIBI
14.9 ounces
11.2 x 3.6 x 1.4 inches
Features
- Large 300-Amp provides durability, up to 5/32" inch electrode capacity.
- Lightweight and easy to operate with newly designed level for good hand clearance and better hold.
- Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode.
- This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection.
- The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
Manufacturer: KSEIBI
Part Number: 331215
Item Weight: 14.9 ounces
Package Dimensions: 11.2 x 3.6 x 1.4 inches
Item model number: 331215
Is Discontinued By Manufacturer: No
Size: 300 Amp
Color: Orange
Finish: Copper
Material: Copper
Pattern: American Type
Item Package Quantity: 1
Number Of Pieces: 1
Number of Handles: 1
Handle Material: Plastic
Included Components: Stick Electrode Holder 300 Amp Capacity
Batteries Included?: No
Batteries Required?: No
BLUECOW
7.83 pounds
10.79 x 5.55 x 2.6 inches
Features
- Sturdy Quality These welding holders made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
- Wide ApplicationsThe magnetic angle welding tools are Ideal for being used connect parts, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.This is a fast and easy method to hold your metal workpieces at the angle you need for all welding jobs!
- Powerful Welding MagnetEach package comes with 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, the bright color will help you locate it easily, Makes your welding job more efficiently and precisely,free your hands and make works easier.
- Keep SafeWhen using Magnet Welding Clamps, the center hole on the magnets allows you to grab and move the magnets easily. Which free up your hands for improving work safety and making works easier
- Popular Degree Angle Magnets Welding ToolsEach magnetic welding holder is designed with an arrow shape which allows the magnet to align itself with the tubing in a self-centering fashion, and Designed for 45, 90, and 135-degree angles, allows you to work with different angles. Come with detailed illustrate.
Manufacturer: Raceup
Part Number: Magnet50
Item Weight: 7.83 pounds
Package Dimensions: 10.79 x 5.55 x 2.6 inches
Size: 6 pcs 50lb
Color: Red
Material: Magnet
Batteries Required?: No
Spurtar
4.02 pounds
4.88 x 4.72 x 3.98 inches
Features
- PREMIUM WELDING MAGNET SET: Made of high-quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion. Spurtar Magnet Holder Makes your welding job more efficiently and precisely.
- MULTIPURPOSE: The square magnets welder tools are convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes. Also, it can be used as a floater to separate steel plates in practical application
- SAFE & SECURE: These small magnets welding holders grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
- THREE ANGLES: The powerful magnetic angle welding tools with an arrow design supports material at 45°, 90°, and 135° for easy access and allow you to work with different angles while welding, assembly and marking work.
- STRONG POWER: Spurtar Angle Welding Magnet can hold and support any ferrous metal objects up to 25 lbs. These heavy-duty arrow magnets stick solidly and ensure a hand free welding while the bright red color will help you locate it more easily.
Manufacturer: King Company
Item Weight: 4.02 pounds
Package Dimensions: 4.88 x 4.72 x 3.98 inches
Is Discontinued By Manufacturer: No
Size: 6pcs 3"
Color: Red
Batteries Included?: No
Batteries Required?: No
SÜA
12 ounces
9.3 x 3.5 x 1.7 inches
Features
- Holds Electrodes up to 1/4".
- Cable Size: Up to AWG 2/0
- High quality Electrode Holder AF-3 Style.
- Maximum Amperage: 300 A.
Manufacturer: SÜA
Part Number: S-AF-3
Item Weight: 12 ounces
Package Dimensions: 9.3 x 3.5 x 1.7 inches
Is Discontinued By Manufacturer: No
Style: 300 Amp
Material: Brass-Cooper-Plastic
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
SÜA
1.2 pounds
11 x 3.7 x 1.7 inches
Features
- Holds Electrodes up to 3/8".
- Maximum Amperage: 500 A.
- Cable Size: Up to AWG 4/0.
- High quality Electrode Holder AF-50 Style.
Manufacturer: SÜA
Part Number: S-AF-50
Item Weight: 1.2 pounds
Package Dimensions: 11 x 3.7 x 1.7 inches
Is Discontinued By Manufacturer: No
Style: 500 Amp
Material: Other
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
JACAZOOY
1.7 pounds
9.92 x 7.72 x 2.83 inches
Features
- ️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth.
- ️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.
- ️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
- ️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error)
- ️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
Manufacturer: Jacazooy
Part Number: ZL200-201
Item Weight: 1.7 pounds
Package Dimensions: 9.92 x 7.72 x 2.83 inches
Material: Metal Copper
Batteries Required?: No
Reboot
1.1 pounds
8.6 x 3.2 x 1.7 inches
Features
- Electrode holder is made of High Quality Brass material with Insulated Handle.
- Screw type 400A holder; Current:300-400A
- Accepts rods up to 5/16''; Electrode thickness:1/16-5/32(1.6-4.0mm)
- Size: 21.5*8*4CM (8.45*3.15*1.55inches)
- Electrodes burn within 1''from the head and can be bent to any angle and still be held securely
Manufacturer: Reboot
Part Number: REBOOT-0010
Item Weight: 1.1 pounds
Package Dimensions: 8.6 x 3.2 x 1.7 inches
Is Discontinued By Manufacturer: No
Size: 400 Amp
Color: Red
Material: Copper
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
YESWELDER
1.26 pounds
10 x 3 x 1.5 inches
Features
- EXCELLENT QUALITY High conductivity and improved cable connection, Clamps are made of high quality pure copper, which is more secure and easy to replace
- SAFETY DESIGN Heat resistant handle, made of arc-resistant insulation and impact resistant material
- COMFORT OPERATIONGREAT FOR most Arc, MMA, Hand Stick welding jobs. Easy to operate with newly designed level for good hand clearance and better hold.
- MAXIMUM AMPERAGESuitable for up to 300A.
Manufacturer: YESWELDER
Part Number: KY1041
Item Weight: 1.26 pounds
Package Dimensions: 10 x 3 x 1.5 inches
Color: Orange+Black
Style: KY1041-300A
Material: Copper
Batteries Included?: No
Batteries Required?: No
SPRIGHOLLY
1.04 pounds
10.63 x 3.5 x 1.54 inches
Features
- Electrode Holder can be used for 300A.
- Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode. grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions.
- MATERIALS:Forging brass.PACKAGE:1 electrode holder included.
- Constructed for long life and dependability
- Suitable for ARC Stick/MMA Welding Machine. Hand Stick welding jobs.
Manufacturer: SPRIGHOLLY
Part Number: SP-A
Item Weight: 1.04 pounds
Package Dimensions: 10.63 x 3.5 x 1.54 inches
Size: 300A
Batteries Included?: No
Zeafree
3.87 ounces
8.66 x 6.69 x 3.54 inches
Features
- Insulated for safety and operator
- Grooved jaws allow electrodes to be used at different angles for comfort and efficiency
- Welding Cable Length: 10-foot. With DKJ10-25 connector
- Provides excellent conductivity and durability
- Heavy duty clamp style electrode holder for STICK / ARC / MMA welding. Works well on various welding rods
Manufacturer: Zeafree
Part Number: 500027604
Item Weight: 3.87 ounces
Product Dimensions: 8.66 x 6.69 x 3.54 inches
Country of Origin: China
Color: Black
Item Package Quantity: 1
TOOL4YOU
2.51 pounds
11.14 x 8.27 x 3.46 inches
Features
- This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force
- This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required
- The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth
- This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use
- 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*
Manufacturer: TOOL4YOU
Part Number: TOOL4YOU
Item Weight: 2.51 pounds
Package Dimensions: 11.14 x 8.27 x 3.46 inches
Batteries Required?: No
ORRIL
Features
- 3.With 3Meters Copper cable
- 4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc.
- 1.300Amps Welding Electrode Holder American Style
- 5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable
- 2.With 35-50 quick plug. Easy connected.
SÜA
4.96 pounds
10.67 x 10.35 x 3.35 inches
Features
- Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
- Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4".
- Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
- Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***
- RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
Manufacturer: SÜA
Part Number: AF-3-CX0020-FP0808_15
Item Weight: 4.96 pounds
Package Dimensions: 10.67 x 10.35 x 3.35 inches
Size: 15 FEET - Dinse 10-25
Color: Black
Material: Polymer
Voltage: 600 Volts
Amperage Capacity: 200 Amps
Item Package Quantity: 1
Temperature Range: (-58 to 221) Degrees Fahrenheit
Extension Length: 15 Feet
Usage: Commercial/Residential
Batteries Included?: No
Batteries Required?: No
WeldForce
10.1 ounces
Features
- 15-Inch Height, 3 5/16-Inch Inner Diameter, 3 7/16” Outer Diameter
- Removable internal storage divider
- Keep your electrodes fresh and dry
- Updated Item; Includes Gasket, Twist-tight seal
- Built-in belt clip and standing support
Manufacturer: WeldForce
Part Number: FBA_910102
Item Weight: 10.1 ounces
Item model number: FBA_910102
Is Discontinued By Manufacturer: No
Color: Royal Blue
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
LENCO MARINE
Features
- Package Dimensions: 2.5 L x 30.5 H x 15.2 W (centimeters)
- Included components: Electrode Holders
- Unit count: 1.0
- Material(s): nylon; glass
KOP&WDHOM
1.06 pounds
11.14 x 3.54 x 1.61 inches
Features
- 2.Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
- 4.Great for most Arc, MMA, hand stick welding jobs.
- 1.Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
- 5.Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
- 3.Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections.
Manufacturer: KANGPENG
Part Number: KP-300A-HA
Item Weight: 1.06 pounds
Package Dimensions: 11.14 x 3.54 x 1.61 inches
Size: Medium
Color: Red
Style: 300A
Batteries Required?: No
Lincoln Electric
Features
- Available in 300 amp capacity
- It is heat resistant and insulated for safety
- It is lightweight
- Constructed for long life and dependability
LENCO MARINE
Features
- Oval-point screw cable connection is standard on all models
- Handles are Molded from a durable glass filled nylon material with a good heat and Impact resistance
- Upper and lower tongs are Made from a high copper alloy for maximum conductivity and strength
- Top and bottom tip insulators are a Molded fiberglass compound and will withstand intensive heat Impact
KANGPENG
1.3 pounds
10.98 x 3.54 x 1.57 inches
Features
- Large 500Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
- Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
- Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
- Great for most Arc, MMA, hand stick welding jobs.
- Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections.
Manufacturer: KANGPENG
Part Number: KP-500A-US
Item Weight: 1.3 pounds
Package Dimensions: 10.98 x 3.54 x 1.57 inches
Size: Medium
Color: Red
Style: 500A
Batteries Required?: No
Lissam
15.2 ounces
8.75 x 3.25 x 1.75 inches
Features
- HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections
- HOLDS ELECTRODE RODS UP TO 5/16"
- GREAT FOR MOST Arc, MMA, Hand Stick welding jobs
Manufacturer: LISSAM WELDING
Part Number: Mswkx-fpsf-cf4213
Item Weight: 15.2 ounces
Package Dimensions: 8.75 x 3.25 x 1.75 inches
Material: Copper
Batteries Required?: No
JOHAHTANG
1.52 pounds
1.2 x 1 x 0.5 inches
Features
- Welding Chipping Hammer & Wire Scratch BrushWelding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability.
- High Quality Welding Electrode HolderThe upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work
- Heat-resistant insulation for SafetyThe handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety
- Groove Jaw DesignThe grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode
- Work GreatWhich are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds. The welding hammer is a durable tool for long strokes. It can also be used as a life hammer and broken ice hammer
Manufacturer: JOHAHTANG-oem
Part Number: 14042
Item Weight: 1.52 pounds
Product Dimensions: 1.2 x 1 x 0.5 inches
Lissam
1.37 pounds
11.57 x 4.02 x 1.54 inches
Features
- MATERIALS:Casting brass.PACKAGE:1 electrode holder included.
- GREAT FOR most Arc, MMA, Hand Stick welding jobs
- CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with.
- ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch
- HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.
Manufacturer: LISSAM WELDING
Item Weight: 1.37 pounds
Package Dimensions: 11.57 x 4.02 x 1.54 inches
Is Discontinued By Manufacturer: No
Size: 300A
Material: Copper
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
Bolsen
1.47 pounds
10.35 x 7.64 x 1.34 inches
Features
- The handle of the welding grounding clamp is non-slip, and there is a more reliable grounding conductive tape, which is safe and reliable to use.
- Durable for long time using and so practical.
- for MIG MMA TIG ARC Welding Earth Clip Manual Cable Welder Alligator Clamps
- 300A/500A/800A Earth Ground Cable Clip Clamp Manual Welder Electrode Holder Welding Processing Ground Clamp
- Ergonomic handle, non-slip, comfortable grip
Manufacturer: b40916002
Item Weight: 1.47 pounds
Package Dimensions: 10.35 x 7.64 x 1.34 inches
Size: 800A
Color: Silver
Number Of Pieces: 2
Batteries Included?: No
Batteries Required?: No
Blackhorse
3.84 ounces
13.78 x 3.94 x 0.2 inches
Features
- Flame retardant split leather material
- Best supply of electrodes close at hand
- Light weight, 3-1/2" x 14"
- With a metal snap for hanging onto your belt
- Perfect to hold husbands welding rods, durable and doesn't catch fire from sparks
Manufacturer: Xiyao
Part Number: Electrode holder
Item Weight: 3.84 ounces
Product Dimensions: 13.78 x 3.94 x 0.2 inches
Item model number: electrode holder
Color: Black
Material: Leather
Item Package Quantity: 1
Number Of Pieces: 1
Handle Material: Leather
Batteries Included?: No
Batteries Required?: No
S SIMDER
1.86 pounds
11.97 x 7.95 x 2.32 inches
Features
- This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force
- This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required
- 6.5ft long Welding Electrode Holder with cable and 4.9ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*
- The Black Electrode Holder and the White Electrode Holder will be shipped randomly.This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use
- The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth
Manufacturer: S SIMDER
Part Number: S SIMDER
Item Weight: 1.86 pounds
Package Dimensions: 11.97 x 7.95 x 2.32 inches
Batteries Included?: No
Batteries Required?: No
Utoolmart
1.23 pounds
11.34 x 4.17 x 1.65 inches
Features
- Material : Metal Copper
- Current : 500A
- Package : 1xWelding Earth Clamp
- Color : Copper
- Product Name : Welding Earth Clamp
Manufacturer: Utoolmart
Part Number: UT190905H-0083
Item Weight: 1.23 pounds
Package Dimensions: 11.34 x 4.17 x 1.65 inches
Size: 500A pure copper grounding clamp
Material: Copper
Batteries Included?: No
Batteries Required?: No
Vikye
10.9 ounces
8.27 x 2.95 x 1.18 inches
Features
- [Stable Performance] - It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
- [Humanity Design] - Ergonomically designed for comfort during welding.
- [Durable & Longlife] - The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
- [Copper Material] - Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
- [Ideal Choice] - This is a good helper for welding working which can make sure the safety
Manufacturer: Vikye
Part Number: Vikyex24pgd0ugm
Item Weight: 10.9 ounces
Product Dimensions: 8.27 x 2.95 x 1.18 inches
Finish: Finish
Material: Material
Power Source: PowerSource
Installation Method: InstallationMethod
Item Package Quantity: 1
Spout Height: 1 Centimeters
Included Components: Inc
Batteries Required?: No
WANSEN development Co.,Ltd
5.66 pounds
12.32 x 7.6 x 5.12 inches
Features
- 500Amps Welding Electrode Holder 3M / 10FEET 35mm Cable 10-25 35-50 Connector for ARC MMA Welder
- Constructed for long life and dependability It is heat resistant and insulated for safety Available in 500 amp capacity
- high quality copper, the earth clip has good conductivity while connected.
- Stick Electrode Holder and Cable Assembly, Twist Mate, 35-50 Cable Connector. （Complimentary small quick plug 10-25）
- can be used in stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications
Manufacturer: WANSEN development Co.,Ltd
Part Number: 35-1
Item Weight: 5.66 pounds
Package Dimensions: 12.32 x 7.6 x 5.12 inches
Country of Origin: China
Item model number: 35-1
Is Discontinued By Manufacturer: No
Size: 2 AWG /35mm cable (10 FEET)
Color: Black
Power Source: Ac/dc
Voltage: 110 Volts
Wattage: 4.8 KW
Amperage Capacity: 160 Amps
Maximum Power: 4800 Watts
Item Package Quantity: 1
Cord Length: 10 Feet
Outside Diameter: 35 Millimeters
Plug Format: A- US style
Usage: For welding
Batteries Included?: No
Batteries Required?: No
Walfront
1.34 pounds
14.17 x 4.72 x 1.57 inches
Features
- Fast Heat Dissipation -- The handle is made of arc-proof, insulated and impact-resistant material, fast heat dissipation, slow heating up
- ARC Welding Clamp -- Used to clamp the electrode rod during arc welding, with Insulated Handle
- Comfort Operation -- Thick non-slip handle, ergonomically designed for increased comfort of the operation
- Good Electricity Conduction -- Pure copper tong jaws has good electricity conduction performance
- Strong Clamping Effect -- High performance spring still keeps strong clamping after long term use
Manufacturer: Walfront
Part Number: Walfront6km0x4hs7p
Item Weight: 1.34 pounds
Product Dimensions: 14.17 x 4.72 x 1.57 inches
Finish: Finish
Material: Material
Power Source: PowerSource
Installation Method: InstallationMethod
Item Package Quantity: 1
Spout Height: 1 Centimeters
Included Components: Inc
Batteries Included?: No
Batteries Required?: No
Hobart
4.55 pounds
Features
- 100% duty cycle
- Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
- 50 ft work cable with clamp
- Consists of 50 ft No. 2 electrode cable with holder
Manufacturer: Hobart
Part Number: 195195
Item Weight: 4.55 pounds
Item model number: 195195
Size: S
Item Package Quantity: 1
Blue Demon
1.76 ounces
8 x 5.5 x 1 inches
Features
- Made of polyethylene, eyelet on each tube allows you to consolidate on large key ring
- Each tube holds up to 10 pieces of tungsten 1/8" and smaller, will hold approx 5-7 pieces of 5/32", 3/26", and 1/4" tungsten electrodes
- Store your new or used tungsten electrodes by color that match their AWS Class
Manufacturer: Blue Demon
Part Number: TST-7-ASSORTED
Item Weight: 1.76 ounces
Product Dimensions: 8 x 5.5 x 1 inches
Country of Origin: China
Item model number: TST-7-ASSORTED
Item Package Quantity: 1
Batteries Required?: No
Eastwood
1.32 pounds
9.37 x 7.36 x 1.73 inches
Features
- 200 Amp Electrode Holder For Stick/Arc Welding With 3 Meter Long Cable
- Works With Arc80, Tig200Dc
- Fits Eastwood Tig 200 Digital.
- Dinse 25 Male Connector
- Fits Eastwood Tig200Acd
Manufacturer: Eastwood
Brand: Eastwood
Item Weight: 1.32 pounds
Package Dimensions: 9.37 x 7.36 x 1.73 inches
Country of Origin: China
Manufacturer Part Number: 20517
jhtii
13.4 ounces
3.94 x 3.43 x 0.79 inches
Features
- Welding Tools Strong Magnetic Force: Full surround resin sealing design, magnetic force lasting without weakening.
- Widely Application: Ideal for being used as holder and positioner in welding, soldering, marking off, pipe installation.
- Precise Welding: Magnetic welding holder calibrated angle design, degree angle positioning used for 45, 90, and 135 180 degree angles.
- Welding Magnet Material: Thickened galvanized plate anti-collision shell wear-resistant use longer.
- Easy welding: fixed welding parts, angle positioning, strong magnets, a variety of angles, convenient, time-saving.
Manufacturer: JHTII
Part Number: JHTII-01
Item Weight: 13.4 ounces
Package Dimensions: 3.94 x 3.43 x 0.79 inches
HUGEWELD
4.35 pounds
11.73 x 7.6 x 6.54 inches
Features
- 300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft)
- 5 IN 1:Multi-purpose household and welding repair tool kit
- Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks
- Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer
- HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications.
Manufacturer: resunny
Part Number: Mma-kit
Item Weight: 4.35 pounds
Package Dimensions: 11.73 x 7.6 x 6.54 inches
Pattern: Welding set
Eastyard
2.7 pounds
3.94 x 3.78 x 2.68 inches
Features
- WIDE APPLICATION- The welding magnets and clamps can be used for welding, soldering, assembly, marking-off, pipe installation and in hanging application. It can also be used as a floater to separate steel plates for job efficiency.
- WORRY-FREE SERVICE- 100% brand new arrow welding magnet set. Backward with our life time support and 12-months limited time warranty. No risk purchasing!
- PREMIUM QUALITY- Constructed of high-quality stainless steel with a powder coated finish, these magnetic welding holders are durable, resistant to rust and corrosion whatsoever and will last through years of use.
- MULTI-ANGLE- Arrow welding magnets can hold work pieces at 45°, 90°, and 135° angles for easy access while leaving your hands free to work more efficiently. The center hole on the magnets allows you to easily grab the weld magnets.
- STRONG POWER- Strength strong welding magnet can hold any ferrous metal object up to 25lbs and stick solidly ensure a hands-free welding while the red color will help you locate it easily.
Manufacturer: Eastyard
Part Number: TO-TMH0259A4US
Item Weight: 2.7 pounds
Package Dimensions: 3.94 x 3.78 x 2.68 inches
ESAB AB
1.46 pounds
12.91 x 3.86 x 3.86 inches
Features
- Welding in hard-to-reach spots
- Reliability of fastening doesn't become worse as at other holders over time
- Reliable fixing of an electrode sure contact of the holder with an electrode
- Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work
- Lack of uninsulated surfaces of the holder
Manufacturer: ESAB AB
Item Weight: 1.46 pounds
Package Dimensions: 12.91 x 3.86 x 3.86 inches
Material: Brass
Item Package Quantity: 1
Batteries Required?: No
Walker Partners
10.2 ounces
4 x 2.5 x 3.5 inches
Features
- CONVENIENT: Hangs off the side of the welding table, in a place convenient to you
- EASY TO USE: The welder can lift a single tungsten electrode out with welding gloves on
- STURDY: Made with hard metal (Stainless Steel) and using a 50 lb magnet to hold it in place
- EASY TO STORE: Just pull tungsten holder off your fabrication table and stick it to a metal surface ready for your next TIG weld.
- QUALITY: Superior Building Material, Stainless steel and ceramic magnet
Manufacturer: Walker Partners
Part Number: TEH3.5
Item Weight: 10.2 ounces
Product Dimensions: 4 x 2.5 x 3.5 inches
Country of Origin: USA
Item model number: TEH3.5
Finish: Eastwoods extreme chrome powder paint
Material: Stainless Steel
Shape: Rectangle
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
SÜA
6 pounds
Features
- RATED: 300 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
- Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
- Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #1 AWG - 0.488" O.D.
- Cable Connector Options: LC-40 (Cam-Lock), Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***
- Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4".
Manufacturer: SÜA
Part Number: AF-3-LC40-FP0348_15
Item Weight: 6 pounds
Size: 15 FEET - LC40
Color: Black
Material: Polymer
Voltage: 600 Volts
Amperage Capacity: 300 Amps
Temperature Range: (-58 to 221) Degrees Fahrenheit
Extension Length: 15 Feet
Usage: Commercial/Residential
DEKOPRO
12.1 pounds
16.77 x 12.24 x 6.89 inches
Features
- Portable Design:This welder features a easy carrying handle,compact design, easy for translation and storage. Very convenient, can be used anywhere you need
- Multi Use: The MMA welder is suitable for welding stainless steel, mild steel, aluminum and other metal materials
- Advanced IGBT Inverter Technology:Powerful welder capable of welding mild steel, weld steel, stainless steel and cast iron. IGBT power device with unique control mode improves the reliability of welding machine
- Energy Efficient:Reduce the damage of Copper and Iron,obviously increase the welding frequency,and energy-conserving result is remarkable.Closed loop feedback control,the output voltage is stable,strong adaptability for electricity network.
- Professional ETL Certificate:The welding machine has ETL certificate for added safety. Each MMA welder device undergoes a strict inspection to ensure its reliability and efficiency. Built-in anti-stick, hot start and Excellent Arc stability.
Manufacturer: DEKOPRO
Part Number: MMA-160 ARC Welder
Item Weight: 12.1 pounds
Package Dimensions: 16.77 x 12.24 x 6.89 inches
Size: MMA-160 ARC Welder
Material: MMA
Batteries Included?: No
Batteries Required?: No
US Forge
11.2 ounces
9.3 x 3.3 x 0.7 inches
Features
- Will accept up to #2 welding cable
- A quarter turn of its handle loosens the rod for removal or replacement
- Electrodes burn within 1" from the head and can be bent to any angle and still be held secure
- Accommodates rods from 3/32" to 3/16" dia.
Manufacturer: US Forge
Part Number: 212
Item Weight: 11.2 ounces
Product Dimensions: 9.3 x 3.3 x 0.7 inches
Country of Origin: China
Item model number: 212
Item Package Quantity: 1
Warranty Description: 90 days
Yanmis
Features
- [Humanity Design] -- Ergonomically designed for comfort during welding.
- [Durable & Longlife] -- The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
- [Copper Material] -- Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
- [Ideal Choice] -- This is a good helper for welding working which can make sure the safety.
- [Stable Performance] -- It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
AIZNI
4.3 pounds
10.24 x 7.09 x 2.36 inches
Features
- [Perfect Angle] The arrow welding magnets can hold the material at 45°, 90° and 135° ，Arrow Angle Welding Magnets easily angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
- Stainless Steel Material: Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion
- easy to use: Whether you are welding, soldering, assembling, marking off, or installing pipes, these magnetic welding holders are convenient.
- [Worry-Free After-Sales Service] Arrow Welding Magnet set has very good magnetism, and we also provide high-quality after-sales service. If you are not satisfied, you can request a full refund for replacement products, please rest assured to buy
- 2PCS 75LBS WELDING MAGNET: 5"X2 pcs with 75 lbs weight limit, ,The center hole on the magnets allows you to easily grab the weld magnets，high quality strong magnets sticks solidly to any metal object
Manufacturer: AIZNI
Part Number: 768497577374
Item Weight: 4.3 pounds
Package Dimensions: 10.24 x 7.09 x 2.36 inches
Batteries Included?: No
Batteries Required?: No
ESAB AB
3.52 ounces
10.16 x 7.2 x 2.05 inches
Features
- no moving parts and springs - reliability;
- all elements of the electrode holders are completely isolated - maximum electrical safety;
- Reliable fixing of an electrode sure contact of the holder with an electrode;
- no protruding parts - a small size;
Manufacturer: ESAB AB
Part Number: 0700006015
Item Weight: 3.52 ounces
Package Dimensions: 10.16 x 7.2 x 2.05 inches
Item model number: 0700006015
Style: 400 AMP
Item Package Quantity: 1
Batteries Required?: No
HUGEWELD
4.69 pounds
11.6 x 7.5 x 6.3 inches
Features
- WELDING HELMET MASK---Safety Welding Glasses,Anti-Flog Anti-Glare Protective
- WELDING GLOVES---Leather Forge,Heat/Fire Resistant,Mitts for BBQ,Oven,Grill,Fireplace,Tig,Mig,Baking,Furnace,Stove,Pot Holder,Animal Handling Glove.
- WELDER GROUND CLAMP---Adopting high quality copper,the welding ground clamp has good conductivity,easy to assemble and use,perfect replacement part for manual welder,with stable performance,high reliability.
- ELECTRODE HOLDER---Large 300Amp welding electrode holder provides durability,heat resistant handle,made of arc-resistant insulation and impact resistant material,great for most ARC,MMA,hand STICK welding jobs.
- 5 IN 1---Multi-purpose household and welding repair tool kit
Manufacturer: resunny
Part Number: WELDER CABLE
Item Weight: 4.69 pounds
Package Dimensions: 11.6 x 7.5 x 6.3 inches
Best welding electrode holder Brands
Based on my research, here are the most reputed welding electrode holder brands/sellers
- KSEIBI
- BLUECOW
- Spurtar
- SÜA
- JACAZOOY
- Reboot
- YESWELDER
- SPRIGHOLLY
- Zeafree
- TOOL4YOU
- ORRIL
- WeldForce
- LENCO MARINE
- KOP&WDHOM
- Lincoln Electric
- KANGPENG
- Lissam
- JOHAHTANG
- Bolsen
- Blackhorse
- S SIMDER
- Utoolmart
- Vikye
- WANSEN development Co.,Ltd
- Walfront
- Hobart
- Blue Demon
- Eastwood
- jhtii
- HUGEWELD
- Eastyard
- ESAB AB
- Walker Partners
- DEKOPRO
- US Forge
- Yanmis
- AIZNI
Shoppers Guide
Like said above, if not researched properly you may end up purchasing a bad quality welding electrode holder, to make sure that you’re not spending money on the wrong item, I’m adding this short buyer’s guide to assist you.
1. Buy only if you need
With the increase in eCommerce websites, purchasing anything is just a click away. That’s why a lot of people end up purchasing stuff they don't need. One way to manage this is: add the item to your cart, wait for 7-8 days before ordering it. Look at your cart after 7-8 days, if you still feel like ordering it then order it.
2. Your requirements vs Product offering
There’s no point in purchasing a welding electrode holder that doesn’t solve your needs, similarly, there’s no point in overspending for a feature you won’t need/use. The aim is to find a welding electrode holder that has all the features you need and is in your budget.
3. Decide the features before deciding on a budget
One of the biggest mistakes we make is, we decide a budget first and then start picking the features. This way, we end up limiting our feature set based on the budget. So for instance, a feature you want the most isn’t available in your budget. In a situation like this, most of them end up sacrificing a feature they wanted the most. That’s why I always ask my readers to choose the features before setting a budget.
4. Check Historical Prices
One of the best ways to not overpay for any item is by checking the historical prices and making sure that you’re not purchasing it on the day where the price of the product is on peak or is on the higher end. There are many websites and browser extensions/add-ons that’d allow you to check historical prices of products on websites like Amazon, BestBuy, etc.
5. Compare different options and choose the one that’s suitable for your needs.
The good thing about the internet is it allows you to research different options that sort your needs. For instance, you can compare two welding electrode holder options that come with all the features you need and pick the right one for your needs.
It doesn’t matter what your welding electrode holder needs are, this article aims to help you find the right welding electrode holder option for your use case.
- If you’re looking for the best possible welding electrode holder then you can consider getting the: KSEIBI 331215 300 Amp Welding Electrode Holder American Design, as it comes with the most advanced feature set.
- If you’re looking for a budget welding electrode holder option, then you can consider SPRIGHOLLY 300Amp Electrode Holder Copper Plier Electrode Clamp of Welding Machin Stick Rod Suitable for ARC Stick/MMA Welding Machine (300A), as it comes with most features and costs much lesser than the KSEIBI 331215 300 Amp Welding Electrode Holder American Design
- If you’re looking for a cheap welding electrode holder with some decent features, then you shall consider getting the 800A Electrode Holder Welding Rod Stick Clamp Arc Welding Electrode Clamping Tool Pure Copper Tong Jaws Heavy Duty for MMA ARC Welder, as it’s not only cheap but also comes with decent features.
Still haven’t found the right welding electrode holder? Feel free to get in touch with the INDThemes team using our contact page.
It has been six years now since Mark Hill first began covering news on technology. Though it began out of his love for the tech, it grew into his profession and gave him all the name and fame he has today.
Please put your query or comment in the below box. You email address will not be published. Required fields are marked *