47 Best countersink drill bits for wood in 2022: Analysis Based on 360 Reviews

Features

• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, professional FTG Maximum Torque countersink drill bit set. Packaging set combination unique design protected by US Copyright Office
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/27/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit, 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #6 (9/64") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2331P counter sinker drill bit for wood
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits

Features

• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2337P tapered countersink drill bits
• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, FTG 2337P Maximum Torque countersink drill bits with countersinks for wood
• Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 5 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key) counter sinker drill bit for wood. Counter-bore, and wood plugs size 3/8" and 1/2". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/13/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits

Manufacturer: ‎Fair Trade Group USA LLC

Part Number: ‎FTG 2337P

Item Weight: ‎6.4 ounces

Product Dimensions: ‎4.72 x 0.24 x 0.24 inches

Item model number: ‎FTG 2337P

Style: ‎5 Sizes Set - Hex Shank without Stop Collar

Finish: ‎Black Oxide

Material: ‎Drill Bit High Speed Steel M2 Grade 6542 confirmed in Analysis Report; Cutter #45 Carbon Steel

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• MULTIPURPOSE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc.
• REMOVABLE & ADJUSTABLE: Easy to use the combination of Hex Key to adjust or disassemble the countersink drill bit and the five-flutes chamfering.
• SATISFY ALL YOU DEMAND: Set include 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm and 1 free Hex Key Wrench.If you have any problem, please feel free to contact us.
• THREE-POINTED DESIGN:Quickly and accurately drill a smooth hole.Better in CENTERING and NO SKID . Five-edged chamfer design will fast discharge chips from the hole on both sides automatically.
• CAPABILITY & DURABILITY: Classic Carbon Steel Material. High hardness, offer superior cutting power and durable.

Manufacturer: ‎COMOWARE

Item Weight: ‎10.5 ounces

Package Dimensions: ‎7.99 x 6.14 x 0.87 inches

Is Discontinued By Manufacturer: ‎No

Style: ‎7pc/1pc

Material: ‎High Carbon Steel

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits, professional countersink drill bits set with countersinks for wood. FTG2328 counter sinker drill bit for wood
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 5/4/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit, 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #8 (11/64") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2328 drill bit set hex shank
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood

Manufacturer: ‎Fair Trade Group USA LLC

Part Number: ‎Improved FTG 2328

Item Weight: ‎3.2 ounces

Product Dimensions: ‎4 x 0.1 x 0.5 inches

Is Discontinued By Manufacturer: ‎No

Style: ‎3 Piece Same Size #8 (11/64")

Finish: ‎Black Oxide

Material: ‎Drill Bit High Speed Steel M2 Grade 6542 confirmed in Analysis Report; Cutter #45 Carbon Steel

Item Package Quantity: ‎3

Measurement System: ‎US

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/21/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
• Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills
• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, FTG 2341P Maximum Torque countersink drill bits with countersinks for wood
• Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits

Features

• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits.. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits, professional countersink drill bits set with countersinks for wood. FTG2325 counter sinker drill bit for wood
• Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 3 sizes drill bits with countersink #6 (9/64"), #8 (11/64"), #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills. FTG 2325 counter sinker drill bit for wood
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/21/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits

Manufacturer: ‎Fair Trade Group USA LLC

Part Number: ‎FTG 2325

Item Weight: ‎3.52 ounces

Product Dimensions: ‎4 x 0.5 x 0.1 inches

Item model number: ‎FTG 2325

Size: ‎#6 (9/64") #8 (11/64") # 10 (3/16")

Style: ‎3 Sizes Set without Stop Collar

Finish: ‎Black Oxide

Material: ‎Drill Bit High Speed Steel M2 Grade 6542 confirmed in Analysis Report; Cutter #45 Carbon Steel

Measurement System: ‎US

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, professional FTG Maximum Torque countersink drill bit set. Packaging set combination unique design protected by US Copyright Office
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/27/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit, 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #6 (9/64") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2331P counter sinker drill bit for wood
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits

Features

• THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, FTG 6810P Maximum Torque countersink drill bits with countersinks for wood
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/21/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 3 sizes drill bits with countersink #6 (9/64"), #8 (11/64"), #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills. FTG 6810P counter sinker drill bit for wood
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood

Manufacturer: ‎Fair Trade Group USA LLC

Part Number: ‎FTG 6810

Item Weight: ‎4.8 ounces

Product Dimensions: ‎4 x 0.1 x 0.5 inches

Item model number: ‎FTG 6810

Style: ‎3 Sizes Set with 1 Stop Collar

Finish: ‎Black Oxide

Material: ‎Drill Bit High Speed Steel M2 Grade 6542 confirmed in Analysis Report; Cutter #45 Carbon Steel

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• PREMIUM QUALITYMade with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects.
• IDEAL COMBO SET7 countersink drill bits size of Ø7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm), 9/32”(7mm), 5/16”(8mm) combine with Ø19/32”(15mm) countersink pedestal, 13/32”(10mm) combine with Ø45/64” countersink pedestal. 3 countersink bits with most commonly-used sizes of Ø12mm(1/2"), 16mm(5/8"), 19mm(3/4") A 1/10”(2.5mm) Free Hex Key Wrench Plus. Come with a portable plastic case for easy convenient select, storage and organization.
• SOPHISTICATED DESIGNExtra straightening drill bit with exquisite countersink pedestal provide user a method of drilling a countersink hole with 1 time drill process.Extra straightening drill bit makes the drill hole accurate and smooth, exquisite countersink pedestal creates proper countersink structure with efficient experience.
• EFFICIENT DESIGNFor 7 countersink drill bits, 3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling; 2-spiral flute makes chip removing easy and efficient. For 3 countersink bits, 90°on the point & 1/4" hex shank for quick change make the countersink process convenient. All drill bits get 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness.
• REMOVABLE& ADJUSTABLEPerfect for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, PVC and soft metals. Suitable for hand drill, bench drill and electric drill, #12，#16, #19 are especially fine for quick drill.The drilling depth of countersink drill bits are adjustable by screws with various lengths; Meanwhile, their bits are removable for easy cleaning, sharpening,and replacement. × NOT for hard metals or steel board.

Features

• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, professional FTG Maximum Torque countersink bits for wood. Packaging set combination unique design protected by US Copyright Office
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/27/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 4 Piece drill set All Same Size drill bits with countersink #6 (9/64") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2339P counter sinker drill bit for wood

Features

• Four cutter countersink and tapered drill bit provide superior speed and ideal finish
• The product is manufactured in China
• The product is 3PC Countersink Set
• Easy and simple use kit
• Replacement tapered bits offered
• Drill, countersink and counterbore in one step

Manufacturer: ‎Dewalt

Part Number: ‎DW2535

Item Weight: ‎1.92 ounces

Product Dimensions: ‎7.76 x 3.88 x 0.75 inches

Country of Origin: ‎China

Item model number: ‎DW2535

Is Discontinued By Manufacturer: ‎No

Finish: ‎Nickel

Material: ‎Alloy Steel

Item Package Quantity: ‎1

Included Components: ‎DEWALT Countersink Drill Bit Set #6, #8, #10, 3-Piece (DW2535)

Batteries Included?: ‎No

Batteries Required?: ‎No

Warranty Description: ‎1 Year Full Warranty

Features

• QUICK CHANGE SHANK - The Quick Change 1/4" Shank is Universal size, Compatible with all 1/4" Quick Change Chucks.
• QUALITY VALUE SET - Our Countersink Drills are manufactured in China under JNB Pro Requirements. High Speed Steel M2 (6542 grade) Drill Bit and Carbon Steel #45 Sink Cutters coated with Black Oxide anti-corrosion make our product have better or same quality as USA made. If for any reason your are not satisfied with the product you are invited to return or have product replaced. Your satisfaction is our goal.
• COUNTERSINK DRILL BIT SET - Also Countersink For Woodworking - Included 5 Pieces #4(7/64"), #6(9/64"), #8(11/64"), #10(3/16") and #12(7/32"), the Tapered Drill Bits are manufactured with High Speed Steel M2 which provides long lasting sharpening and very fast drilling and the Four Flute Countersink Cutters made with Carbon Steel #45 and Black Oxide coat to prevent rusting, set comes with 2 Stop Collar, 1 Hex Wrench.
• ADJUSTABLE COUNTERSINK - Also Countersink Bits For Wood - The Adjustable Stop Collar allows you to adjust the Counterbores depth and Adjustable Cutters can be adjusted for many screws sizes. Also known as Juego De Brocas Avellanadoras Para Madera, Avellanadores Para Madera, Juego De Brocas Para Avellanar, Broca De Avellanado. QUICK CHANGE SHANK - The Quick Change 1/4" Shank is Universal size, Compatible with all 1/4" Quick Change Chucks.

Features

• 7pcs three pointed countersink drill bits made of high speed steel with good abrasion resistance and durable,includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm for drilling pilot holes,the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.
• 1/4" hex shank 5 flute countersink drill bit made of high speed steels and with 6 different diameter sizes 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"),used for sinking 90 Degree 6 different sizes Holes into Wood and PVC boards Countersunk Screws and Fixings.
• 3/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material,used for tapered 1/4", 3/8", 1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes,able to cut plugs to 22mm/23mm/25mm/26mm in length.
• Package included 23pcs woodworking chamfer drilling tool, 6pcs 1/4" Hex Shank HSS 5 Flute 90 Degree Countersink Drill Bits, 7pcs Three Pointed High Speed Steel Countersink Drill Bit with One L-wrench for Wood Drilling or Woodworking Chamfer, 8pcs wood plug cutters drill bit set and 1pcs Automatic center punch for marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering

Manufacturer: ‎Rocaris

Item Weight: ‎1.65 pounds

Package Dimensions: ‎8.39 x 6.69 x 1.5 inches

Is Discontinued By Manufacturer: ‎No

Finish: ‎Titanium

Material: ‎High Speed Steel

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• [Common Interface]: The product interface size is suitable for most household Cordless Drills
• [A variety of drill bits]: 5 different drills, which can meet all your daily needs
• [Ultra-high strength]: easily perforate wood, metal, plastic and other materials
• [With auxiliary tools]: Allows you to change the drill bit at any time, and makes it easier for you to drill
• [Multiple sizes]: Each drill has multiple sizes to meet your different needs for sizes

Manufacturer: ‎LAMPTOP

Part Number: ‎019845X

Item Weight: ‎1.92 pounds

Package Dimensions: ‎5.08 x 3.62 x 3.27 inches

Color: ‎26-Pack Style

Finish: ‎Titanium

Material: ‎High Speed Steel

Measurement System: ‎US

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• CARPENTER GRADE PRECISION GROUNDED 82 DEGREE TIPS - Our Counter Sinker Bits Consist of 4 Incredibly Sharp Blades That Cut Into The Hardest Woods with Ease. 1/4" Hex Shaft That's Compatible with Most Drills & Impact Drivers
• 8 PACK OF COUNTERSINK DRILL BITS - In the Following Sizes: 5/64 - #4, 3/32 - #6, 9/64 - #6, 7/64 - #8, 1/8 - #10, 9/64 - #10, 9/64 - #12
• STORAGE CASE INCLUDED - Keeps Your Countersink Bits Organized and Safe in a Hard Shell Plastic Case
• ADJUSTABLE LENGTH - Easily Adjust the Overall Length of the Bit with 2 Allen Head (Hex) Screws. Hex Key Allen Wrench is Included With Every Purchase
• LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.

Features

• HIGH QUALITYCountersink drill bit is made by high speed steel, this countersink drill bit is easy to use. Meanwhile compared with ordinary the drill accuracy more high.
• GOOD WORKINGThe countersink drill bit have self-starting point and five-fluted design eliminates chatter and vibration for smooth operation to make clean, accurate and burr-free cuts.
• USER-FRIENDLY DESIGNStandard 1/4 inch hex shank is quick change compatible and has an adjustable counter sleeve depth with Allen wrench.
• MULTIPURPOSECountersink drill bit erfect for wooden planks, plastic, soft metals, fiber board, particle board, plywood, alumiumn board etc.
• SATISFY YOU ALL DEMANDCountersink drill bit set is include 5 pcs of drill bits in 5 different sizes to satisfy you all demand. The most often used sizes for carpenters, cabinet, furniture makers and other wood working trades.

Features

• Suitable: Perfect for wood openings, reams, chamfered, screw heads, etc. Suitable for most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel, don't work on stainless.
• Easy To Use: 1/4" hex shank drill bit is suitable for quick change,suitable for all handheld and stationary drills as well as the power drivers.
• Durable: Made from High-Carbon Steel with Tin-coated for corrosion resistance.
• Size: 6 pieces different diameter sizes: 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4").
• Design: All have a 90 degree holes angle on the point for sharp,five-flute designed with staggered cutting teeth arranged to ensure free chip flow and rapid chatter free cutting.

Manufacturer: ‎MACXCOIP

Part Number: ‎DJQ-ZMN

Item Weight: ‎4.2 ounces

Package Dimensions: ‎5.08 x 3.23 x 0.79 inches

Color: ‎Gold

Style: ‎High Carbon Steel

Finish: ‎Gold

Material: ‎High Speed Steel

Batteries Required?: ‎No

Features

• Professional Woodworking Set- Woodworking chamfering drill set includes 6pcs 1/4" hexagonal shank HSS 5-edge 90 degree countersunk bit, 7pcs triangular high-speed steel countersunk bit with L-shaped wrench; 8pcs cork milling bit and 1 automatic center punch
• Multiple Application- This is a complete set of woodworking tools, which can be used for wood, particle board, fiberboard, logs, plastic boards, PVC pipes, etc. It is very suitable for professionals or beginners, and will be a good gift for your friends, fathers, carpenter lovers and DIY lovers
• Three Pointed Countersunk Drill Bit- It's made of high-speed steel, with good wear resistance and durability, including 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm pilot holes, large chip flutes and five chamfers for speed up cutting speed and easier to discharge wood chips
• Wood Plug Cutter- 3/8" shank wood plug cutter bit set is made of durable carbon steel, used for tapered 1/4", 3/8", 1/2", 5/8" wood plugs to cover recessed screw holes or hide blemishes, able to cut plugs to 22mm/23mm/25mm/26mm in length
• Countersink Drill Bit- It is made of high-speed steel with good wear resistance and durability. There are 6 different diameter sizes 1/4" (6mm), 5/16" (8mm), 3/8" (9mm) )), 1/2"(12mm), 5/8"(16mm), 3/4"(19mm), used for sinking 90 degree countersunk screws and fixing parts on 6 different sizes of wood and PVC boards hole

Features

• 𝔹𝕖𝕥𝕥𝕖𝕣 ℙ𝕖𝕣𝕗𝕠𝕣𝕞𝕒𝕟𝕔𝕖The countersink bit is made of M2 HSS (High Speed Steel), which shows better durability in the drilling process. And the pin-fastened drill bit is tightly bonded to the shank and will not loosen easily, which will make the drilling process easier in every way. At the same time, Rokrou tapered drill bit is equipped with 5 different sizes #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), it will meet your various needs.
• 𝕌𝕟𝕚𝕧𝕖𝕣𝕤𝕚𝕒𝕝 𝕌𝕤𝕖Universal 1/4 inch hex shank prevents slipping in standard chucks and is compatible with all 1/4 inch quick-change chucks, including impact drills of dewalt, Bosch,Black&Decker and so on; Hex Key (Allen Wrench) included.
• ℂ𝕠𝕦𝕟𝕥𝕖𝕣 𝔹𝕠𝕣𝕖Countersink drill bit has an adjustable 4-blade countersink, while its chamfer is 82 degrees, which will be smooth throughout the drilling process. This allows for a more adaptable tapered hole for screw drilling.
• 𝔸𝕕𝕛𝕦𝕤𝕥𝕒𝕓𝕝𝕖The drill bit is held tightly in the shank by 2 hex screws, which makes it easy to adjust the overall bit length and thus control the depth when drilling.
• 𝟟/𝟚𝟜 ℂ𝕦𝕤𝕥𝕞𝕠𝕖𝕣 𝕊𝕖𝕣𝕧𝕚𝕔𝕖30-day money-back guarantee for You may return your undamaged product and packaging within 30 days of purchase to receive a refund. No question asked.

Features

• Countersink drill bit for wood with tapered drill bits High Speed Steel M2. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, professional FTG Maximum Torque countersink drill bits set with countersinks for wood. Packaging set combination unique design protected by US Copyright Office
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/27/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 4 Piece drill set All Same Size drill bits with countersink #4 (7/64") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2338P counter sinker drill bit for wood

Features

• Precision Ground 82° Tip For Countersinking Most Machinable Metals, Wood, And Plastic
• Five-Flute Design Reduces Vibration For Smoother Drilling And Extended Life
• Made From Industrial Grade High Speed Steel For Increased Durability
• Includes A Black Oxide Finish For Added Corrosion Resistance

Manufacturer: ‎Irwin Tools

Part Number: ‎1877793

Item Weight: ‎7.4 ounces

Product Dimensions: ‎1.63 x 4.38 x 7 inches

Country of Origin: ‎China

Item model number: ‎1877793

Is Discontinued By Manufacturer: ‎No

Style: ‎Drill Bit Set

Finish: ‎Black Oxide

Material: ‎High Speed Steel

Item Package Quantity: ‎1

Included Components: ‎5 Countersink metal drill bits, plus drawer case

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• SELF-CLEARING: Drill bits are precisely fit into the countersink sleeves and the two chamfered flutes enable faster operation and self-clearing drilling on the swarf, making perfectly sized and shaped holes
• VERSATILE USE: Comes with 5 pieces of replaceable drill bits as a bonus and covers the full range of screw sizes. The countersink bits are ideal for bench drill, hand drill, and a conventional electric drill, perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber, etc..
• HIGH DURABILITY - This countersink drill bit set is proudly made of classic High Speed Steel with excellent hardness of HRC 62-64; it offers superior cutting power, high durability, and good abrasion resistance
• TRUE 82° ANGLE: These pilot screw countersinks bits are designed to match the most commonly used woodworking 82° screws you might encounter in the US and Canada
• PERFECT YOUR CARPENTRY - The 2 in 1 design turns two-step countersinking into one-step operation. This can make perfect countersink holes for both flush-set and plugged screws, without splitting the wood and enjoying neat projects with drill bit sets

Features

• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/21/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 3 sizes drill bits with countersink #6 (9/64"), #8 (11/64"), #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills. FTG 6810P counter sinker drill bit for wood
• THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, FTG 6810P Maximum Torque countersink drill bits with countersinks for wood
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood

Manufacturer: ‎Fair Trade Group USA LLC

Part Number: ‎FTG 6810P

Item Weight: ‎3.84 ounces

Product Dimensions: ‎4 x 0.1 x 0.3 inches

Size: ‎#6 (9/64") #8 (11/64") #10 (3/16")

Style: ‎Three Sizes Set #6#8#10 with 1 Stop Collar

Finish: ‎Black Oxide

Material: ‎Drill Bit High Speed Steel M2 Grade 6542 confirmed in Analysis Report; Cutter #45 Carbon Steel

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• COUNTERSINK DRILL BIT SET - Also Countersink For Woodworking - Included 5 Pieces all same size #6 Cutters (for up to 3/8" or 10mm screws head), 2 extra Tapered High Speed Steel M2 Drill Bit (6542 grade), 1 Stop Collar, 1 Hex Wrench and 1 Safe Container to keep your set safe and always handy
• QUICK CHANGE SHANK - The Quick Change 1/4" Shank is Universal size, Compatible with all 1/4" Quick Change Chucks, Juego De Brocas Avellanadoras Para Madera, Avellanadores Para Madera, Juego De Brocas Para Avellanar, Broca De Avellanado.
• QUALITY VALUE SET - Our Countersink Drill is manufactured in China which allow us to have a competitive price, but the JNB Pro Requirements as the High Speed Steel M2 (6542 grade) Drill Bit and Carbon Steel #45 Cutters make the product have better or same quality as USA made. If for any reason your are not satisfied with the product you are invited to return or have product replaced. Your satisfaction is our goal. Broca Avellanadora Para Madera
• ADJUSTABLE COUNTERSINK - Also Countersink Bits For Wood - The Adjustable Stop Collar allows you to adjust the Counterbores depth and Adjustable Cutters can be adjusted for many screws sizes.

Features

• Three Pointed DesignQuickly and accurately drill a smooth hole. Better in centering and no skid.Five-edged chamfer design will fast discharge chips from the hole on both sides automatically.It can effectively prevent the accumulation of debris retention, improve the drilling efficiency.
• Durability&High HardnessMade of classic carbon steel material, high hardness, offer superior cutting power and durable.Widely used suitable for DIY, home and general building or engineering using, etc.
• Removable and AdjustableThis countersink drill set is contains 6pcs hex key wrench, use the hex key to adjust counter sleeve depth and drilling depth for screws of various lengths. Complete specifications can satisfy all you demand.
• Suitable for WoodworkingCompatible with drilling machines with chuck, for drilling in wood or wood flooring. It is recommended to use the center punch to position before drilling, keep the drill bit Vertical to prevent the drill from bending or breaking.Each drill bit comes with a plastic box with a marked size to facilitate your identification and storage.
• Different SizesOur Countersink drill bit sets include 6 kinds of sizes:2.8 x 8mm（7/64''×5/16"）, 2.8 x 10mm（7/64"×3/8"）, 3 x 8mm（7/16"×5/16"), 3 x 10mm(7/16"×3/8”）, 3.2 x 8mm（1/8"×5/16”）, 3.2 x 10mm（1/8"×3/8"), very suitable for using to multi size wood hole drilling. One tool for multi uses, improve your working efficiency.

Manufacturer: ‎ASDTODW

Item Weight: ‎6.4 ounces

Package Dimensions: ‎4.8 x 3.9 x 0.7 inches

Color: ‎Orange

Material: ‎Metal

Batteries Required?: ‎No

Features

• QUALITY VALUE SET - Our Countersink Drills and Plug Cutters are manufactured in China under JNB Pro Requirements. High Speed Steel M2 (6542 grade) Drill Bit and Carbon Steel #45 Sink and Plug Cutters coated with Black Oxide anti-corrosion make our product have better or same quality as USA made. If for any reason your are not satisfied with the product you are invited to return or have product replaced. Your satisfaction is our goal.
• QUICK CHANGE SHANK - The Quick Change 1/4" Shank is Universal size, Compatible with all 1/4" Quick Change Chucks.
• IMPORTANT TIPS FOR USE - Cutters for Countersink and Counterbore depth are Adjustable for many screws sizes. Developed to complement each other the Adjustable Countersink & Counterbore makes perfect and clean holes to be filled with the Wood Plugs or Wood Dowels. Plug Cutters must be used with Drill Press to have a perfect diameter. The Plug Cutters are not designed to be used with a hand drill, attempting to use a hand drill will cause broken blades or imperfect plugs.
• COUNTERSINK DRILL BIT SET & WOOD PLUG CUTTERS - Included 2 Pieces #8(11/64") and #12(7/32") Adjustable Countersink and Counterbore Cutters with HSS M2 Tapered Drill Bit (for up to 3/8" and 1/2" screws head), 2 Wood Plug or Dowel Cutters 3/8" and 1/2" diameter, 1 Hex Wrench. The set is Imperial Units of Measurements (not metric) - Also known as Adjustable Countersink, Countersink Bits For Wood, Dowel Maker, Plug Cutter For Woodworking, Plug Cutter Kit

Features

• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits, professional countersink drill bits set with countersinks for wood. FTG2328 counter sinker drill bit for wood
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 5/4/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #8 (11/64") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2328 drill bit set hex shank
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits

Manufacturer: ‎Fair Trade Group USA LLC

Part Number: ‎FTG 2328

Item Weight: ‎3.2 ounces

Product Dimensions: ‎4 x 0.1 x 0.5 inches

Item model number: ‎FTG 2328

Is Discontinued By Manufacturer: ‎No

Size: ‎#8 (11/64")

Style: ‎Three Piece Same Size #8 (11/64")

Finish: ‎Black Oxide

Material: ‎Drill Bit High Speed Steel M2 Grade 6542 confirmed in Analysis Report; Cutter #45 Carbon Steel

Item Package Quantity: ‎1

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• Adjustable stop collar attaches to counter bore with two hex screws for a secure fit and can be adjusted for desired counter bore depth
• Adjustable four-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking
• 1/4" quick-change shank reduces slipping in standard chucks and is compatible with all 1/4" quick-change chucks, including impact drills
• Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth
• Tapered drill with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws

Manufacturer: ‎Irwin Tools

Part Number: ‎1882793

Item Weight: ‎1.6 ounces

Product Dimensions: ‎0.63 x 3.88 x 8.38 inches

Item model number: ‎1882793

Is Discontinued By Manufacturer: ‎No

Size: ‎Pack of 1

Material: ‎Metal

Item Package Quantity: ‎1

Head Style: ‎Flat

Measurement System: ‎Metric

Included Components: ‎Countersink wood drill bit set(4)

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• Precision-ground 82-degree tip drills countersink holes into most machinable metals, as well as wood and plastic.
• Made from industrial grade High-Speed Steel for increased durability. Black oxide finish adds corrosion resistance.
• 1/4-inch round shank fits all handheld and stationary drills.
• Five-flute design reduces vibration for smoother drilling and extended bit life.

Manufacturer: ‎IRWIN

Part Number: ‎1877791

Item Weight: ‎2.24 ounces

Product Dimensions: ‎1 x 4.63 x 5.25 inches

Item model number: ‎1877791

Is Discontinued By Manufacturer: ‎No

Finish: ‎Black Oxide

Material: ‎High Speed Steel

Item Package Quantity: ‎1

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• FEATURES - Two side application, one is drill and the other one is screw bits. Up to 3 Times Faster and More Efficient than Standard Drilling & Driving.
• Ideal for plugs or dowel buttons, the 1/4" hex shank can be used with power drills and quick-change chucks
• APPLICATION - Ideal for wood, plastic, drywall etc.Suitable for bench drill, hand drill and conventional electric drill.
• DIMENSIONS - Include 1pc 15/64 inch(#6) countersink with 3/32 inch twist drill, 1pc 5/16 inch(#8) countersink with 7/64 inch twist drill, 1pc 3/8 inch(#10) countersink with 1/8 inch twist drill, 1pc qucik change drill flip drive set with hex key, 3pcs PZ2 screw bits.
• MATERIAL - Made of high carbon steel material, high hardness and durable.

Features

• PRECISION - 82-degree tip drills countersink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel, don't work on stainless.
• COMPATIBILITY – 1/4” round shank fits all handheld and stationary drills.
• VERSATILITY – Comes in 5 most popular sizes bits 1/4, 3/8, 1/2, 5/8, 3/4 inch counter sink drill bits.
• DURABILITY - Made from High-Speed Steel with golden oxide finish for corrosion resistance.
• EFFICIENT- Five-flute design reduces vibration and removes chip better, provides smoother drilling experience and extended bit life.

Features

• Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 5 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key) counter sinker drill bit for wood. Counter-bore, and wood plugs size 3/8" and 1/2". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills
• STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/13/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
• Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2337P tapered countersink drill bits
• THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, FTG 4TO12P Maximum Torque countersink drill bits with countersinks for wood
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits

Manufacturer: ‎Fair Trade Group USA LLC

Part Number: ‎FTG 4TO12P

Item Weight: ‎6.4 ounces

Product Dimensions: ‎3.94 x 0.24 x 0.24 inches

Item model number: ‎FTG 4TO12P

Style: ‎5 Sizes Set with 2 Stop Collars

Finish: ‎Black Oxide

Material: ‎Drill Bit High Speed Steel M2 Grade 6542 confirmed in Analysis Report; Cutter #45 Carbon Steel

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• Drills pilot hole, countersinks and counterbores in one easy operation
• Includes #6, #8, and #10 countersinks Plus a hex wrench
• Creates pilot hole for screw to prevent wood from splitting
• 1/4" hex shank fits in impact drivers and driver-drills
• Drill bit can be adjusted to the desired drilling depth

Manufacturer: ‎Makita

Part Number: ‎A-99661

Item Weight: ‎3.2 ounces

Product Dimensions: ‎0.5 x 3.35 x 7.28 inches

Country of Origin: ‎China

Item model number: ‎A-99661

Is Discontinued By Manufacturer: ‎No

Material: ‎Alloy Steel

Shape: ‎Rectangular

Thickness: ‎10 Centimeters

Item Package Quantity: ‎1

Measurement System: ‎Metric

Usage: ‎Commercial/Residential

Included Components: ‎Countersink #10 (3/16"), Countersink #6 (9/64"), Hex wrench, Countersink #8 (11/64")

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• Easy to UseA Chatter-Free, five-flute designed with staggered cutting teeth arranged to insure free chip flow and rapid chatter-free cutting, reduces vibration for smoother drilling.
• Multi Size sets6 different diameter sizes: 6mm(1/4''), 8mm(5/16''), 9mm(3/8''), 12mm(1/2''), 16mm(5/8''), 19mm(3/4'').
• Professional Design1/4 inch hex shank drill bit is suitable for quick replacement, suitable for most power tools, The cutting edge is hardened and honed for sharpness. all drill bits have an 82-degree angle on the point for sharp and precise countersinking.
• SuitablePerfect for wood openings, reams, chamfers, screw heads, etc. Suitable for chamfering of various soft materials such as wood board, aluminium board, plywood, plastic, PVC board, etc. [Not suitable for metals]
• Durable & Long-lifeThe countersink drill bit set is made of industrial grade high carbon steel with hard titanium coating. The automatic centre punch is made of pure brass. Durability & Long service life.

Features

• { 7pcs 3- Pointed Countersink Drill Bit with L-wrench} Made of high carbon steel which offer high hardness, superior cutting power, good abrasion resistance., includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm for drilling pilot holes, the drill bit large chip flute and five edge chamfer allows faster and easier discharge of sawdust. It is easy to adjust or disassemble the countersink drill bit and the five-flutes chamfer with the provided L-shape hex key.
• { 12pcs 5 Flute Countersink Drill Bits } Made of high speed steels, used for sinking 90 degree 6 different sizes holes into wood and PVC boards countersunk screws and fixings. The measurements of countersink drill bits respectively are 2 x 6 mm (1/4 inches), 2 x 8 mm (5/16 inches), 2 x 9 mm (3/8 inches), 2 x 12 mm (1/2 inches), 2 x 16 mm (5/8 inches), 2 x 19 mm (3/4 inches).
• { Wide Application} Suitable for wood drilling, reaming, chamfering, screw heads, etc., suitable for chamfering various soft materials such as wood, plywood, aluminum, fiberboard, particle board, plastic, PVC board and other various soft material chamfer.
• { 8pcs 3/8" Shank Wood Plug Cutter Drill Bit } Made of high carbon steel, used for tapered 1/4" ,3/8" ,1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes, able to cut plugs to 22mm/23mm/25mm/26mm in length.
• {Woodworking Chamfer Drill Bit Set} The set included 12pcs hex shank HSS 5 flute 90 degree countersink drill bits, 7pcs three pointed high speed steel countersink drill bit with one L-wrench for wood drilling chamfer, 8pcs wood plug cutters drill bit set and 1pcs automatic center punch. Sufficient quantity is enough to meet your various needs. Automatic center punch for marks work piece with a dimple, creating a starting point that prevents screws and drills from wandering.

Features

• Package included 23pcs woodworking drilling or chamfer too,6pcs 1/4" Hex Shank HSS 5 Flute 90 Degree Countersink Drill Bits,7pcs Three Pointed High Speed Steel Countersink Drill Bit with One L-wrench for Wood Drilling or Woodworking Chamfer,8pcs wood plug cutters drill bit set and 1pcs Automatic center punch for marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering
• 7pcs three pointed countersink drill bits made of high speed steel with good abrasion resistance and durable,includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm for drilling pilot holes,the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.
• A set of fully equipped woodworking tools are perfect for professional or beginners. It will be great gift to your father, Woodworking enthusiast, DIY lovers.
• 1/4" hex shank 5 flute countersink drill bit made of high speed steels and with 6 different diameter sizes 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"),used for sinking 90 Degree 6 different sizes Holes into Wood and PVC boards Countersunk Screws and Fixings.
• 3/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material,used for tapered 1/4", 3/8", 1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes,able to cut plugs to 22mm/23mm/25mm/26mm in length.

Features

• ADJUSTABLE COUNTERSINK - Also Countersink Bits For Wood - The Adjustable Stop Collar allows you to adjust the Counterbores depth and Adjustable Cutters can be adjusted for many screws sizes.
• QUICK CHANGE SHANK - The Quick Change 1/4" Shank is Universal size, Compatible with all 1/4" Quick Change Chucks, Juego De Brocas Avellanadoras Para Madera, Avellanadores De Madera, Avellanador Para Madera, Juego de Brocas Para Avellanar, Broca De Avellanado.
• QUALITY VALUE SET - The Countersink Drill is manufactured in China which allow us to have a competitive price, but the JNB Pro Requirements as the High Speed Steel M2 (6542 grade) Drill Bit and Carbon Steel #45 Cutters make the product have better or same quality as USA made. If for any reason your are not satisfied with the product you are invited to return or have product replaced. Your satisfaction is our goal. Broca Avellanadora Para Madera
• COUNTERSINK DRILL BIT SET - Also Countersink For Wood working - Included 3 Pieces sizes #6, #8 and #10 Cutters (for up to 3/8" or 10mm screws head), Top Quality Tapered High Speed Steel M2 Drill Bit (6542 grade), 1 Stop Collar, 1 Hex Wrench.

Features

• Overall length (L) 2-5/8
• (B) Cutting height 3/64-3/8
• (A°) angle 49°
• (D) shank 1/4
• (D) diameter 3/8

Manufacturer: ‎Amana Tool

Part Number: ‎55229

Item Weight: ‎0.006 ounces

Product Dimensions: ‎5.75 x 3 x 1.5 inches

Item model number: ‎55229

Is Discontinued By Manufacturer: ‎No

Material: ‎HSS M2 STEEL

Item Package Quantity: ‎1

Included Components: ‎1 Amana Branded Tool

Batteries Included?: ‎No

Batteries Required?: ‎No

Features

• MULTIPLE USES: This countersink drill bits set is widely used in woodworking projects, softwood & hardwood, fiberboard, particle board, plywood, plastic, PVC and soft metals
• REMOVEABLE& ADJUSTABLE: The countersink bits are easily adjustable with the included hex key wrench which makes it convenient to adjust the depth of the bit before the countersink hits the material
• HIGH CARBON STEEL : MOHOO Countersink drill set is made of high and carbon steel which offers solid countersink, sharp drill bits with high hardness and good abrasion resistance
• TRI-POINTED DESIGN: The tri-cuspid countersink make sure drills will not produce offset, not easy to slip, good for accurate and fast drilling. The five-edged chamfer design of the countersink drill helps to remove chips from the holes on both sides automatically and quickly
• PACKAGE CONTENTS: One set of countersink drill bits comes with 7 pieces of countersink drill bits in 7 size, #3 #4 #5 #6 #7 #8 #10mm, and 1 piece of L-shape hex wrench included

Features

• REMOVABLE & ADJUSTABLE: Easy to use the combination of Hex Key to adjust or disassemble the countersink drill bit and the five-flutes chamfering.
• MULTIPURPOSE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc.
• THREE-POINTED DESIGN:Quickly and accurately drill a smooth hole.Better in CENTERING and NO SKID . Five-edged chamfer design will fast discharge chips from the hole on both sides automatically.
• CAPABILITY & DURABILITY: Classic Carbon Steel Material. High hardness, offer superior cutting power and durable.
• SATISFY ALL YOU DEMAND: Set include 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm and 1 free Hex Key Wrench.100% SATISFACTION GUARANTEE.Please feel free to contact us.

Features

• Tapered drill with widened flutes for drilling fast, clean pilot holes
• 1/4 in quick change shank reduces slipping in standard chucks and is compatible with all 1/4 in quick change chucks, including impact drills
• Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth
• Adjustable four-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking